references
COMPOSITE
100% "COMPOSITE" Clamps
Hard plastic tightening CLIP. Brakes
Body of the Clip Fitting the CLIP with a 30 mm wide Polyester strap
A
A
B
1 - Put the strap around a first brake and leave 30 mm of the strap over (min.) A .
2 -Put the strap around the second brake B without cutting the excess, you will need it for tightening.
B A
B
A
3 - Position the tensioning tool and put the strap B (longest side) into the slot of the tool.
4 - With a 19 mm wrench, tension the strap to around 60 newtons/metre, then cut (*) the strap on each side of the CLIP at a distance of 30 mm (min.).
ALK Ref.: 89.594.00
Strap-tensioner tool
(*) This strap can take a straight cold cut (not bevelled), but it is preferable to make a hot cut (heated blade).
ALK
31
English