Clamps for Air Tanks

STEEL

One-part Strap Clamps

Sold individually - 2 mm thick steel, “Phosphated” then coated with matt black paint or electrogalvanised.
One-part “STRAP” clamp, sold individually, assembled, in a plastic bag: 1 Clamp + 2 Standard M12 nuts. Additional Standard or Nylstop M12 nuts are also sold separately in bags of 4.

Increased safety, with two internal weld seams and two external weld spots at the strap anchorage point on the support.
These clamps are “Phosphated” before being painted, which protects the steel from corrosion and helps the paint to bond.

Ref ALK 78.300.00
Additional Standard or Nylstop M12 nuts are also sold separately in bags of 4.

STEEL

Two-part Strap Clamps

Sold in KITS of two clamps. 2 mm thick steel, “Phosphated” then coated with matt black paint or electrogalvanised.
Two-part “STRAP” clamp, sold in KITS of two clamps in a plastic bag: 2 Straps + 2 Supports + 4 Standard M12 nuts + 2 flat washers + 2 NYLSTOP M12 nuts + 1 set of assembly instructions.
These 2-part clamps enable a 50% gain in stock and transport volumes in comparison to the 1-part clamps.


Ref ALK 78.300.00
Additional Standard or Nylstop M12 nuts are also sold separately in bags of 4.

STEEL

Foldable « STRAP » Clamps

These foldable clamps provide 50% gain in the storage and transport volume compared
to 1-part clamps. These clamps are “Phosphated” before being painted, which protects the steel from corrosion and helps the paint to bond.

Full KIT = 2 Foldable clamps + 4 standard M12 nuts

References available for different tank diameter

KIT Foldable STRAP ClampsSold in KITS of two clamps. 2 mm thick steel, “Phosphated” then
coated with matt black paint or electrogalvanised. .
Foldable “Strap” Clamps sold in KITS containing two clamps in a plastic bag:
2 foldable clamps + 4 standard M12 nuts
Ref ALK 78.300.00
4 standard M12 nuts

STEEL

STRAP Clamp Tips

All our clamps are delivered in the “Standard” form with a welded tip, this is the least expensive solution. The removable “T-shaped” tip enables you to reduce the size of the packaging from 120 to 150 mm (L). To order a “STRAP” clamp with a “T-shaped” tip add a “T” at the end of the usual reference code

With all “STRAP” clamps ref.: 70.xxx.xx, 73.xxx.xx, 88.xxx.xx, 95.xxx.xx, 96.xxx.xx, 97.xxx.xx you have a choice between two types of tips: welded tip or “T-shaped” tip.References available for different tank diameter.

Download datasheet PDF

STEEL

Rubber KITS for STRAP Clamps

Rubber Protection (Resistant to Hydrocarbons) for clamps. Series: 88.xxx.xx, 95.xxx.xx, 96.xxx.xx and 97.xxx.xx. This protection enables the fitting of these clamps in compliance with the Standard: 87/404/CE.
These KITS are sold in plastic bags (1 strap protection + 1 support protection). You can also get these clamps with this protection fitted, if you specify it at the time of your order. E.g.: 97.206.00 with 93.206.00 fitted.


References available for different tank diameter.

Download datasheet PDF

STEEL

Rubber Protection

Roll of Self-Adhesive Foam
Length: 10 metres
Width: 4 cm – Thickness: 5 mm

References available for different tank diameter.
Download datasheet PDF